Crusty, Rusty DIY
This is a DIY project where you can take almost anything and give it a old, crusty, rusty appearance. I chose a $2.00 lamp to experiment on. This is what I was going for: This was a make it up as I go project. First I started with a shiny brass lamp I found for $2.00 at a junk store. Of course, I started painting before I remembered the camera. First I spray painted the lamp two coats of white. Next I took craft paint in Burnt Umber and Brick Red and dry brushed these colors on the lamp. I was trying to achieve a rusty appearance. You want to leave some of the white showing. At this point I am thinking this is the ugliest thing and I should just abandon this project! It could not look any worse so I decided to persevere. Next I took wall Spackle and randomly applied it to the lamp. I started out using a small trowel but found out it worked better using my fingers. Leave areas of the dark paint showing. Just play with the Spackle until you get a look you are happy ...